Aces Killshot Fusion EFI Swap

[85_Ranger4x4]

Anyone know what size the quick disconnects on the fuel pump are called? Pump assembly is for a '86 Ranger.

Bump

Trying to figure out how to mesh generic fuel line (Evil Energy) to my current fuel pump hanger assembly.



Aces injection kit is en route...

 

[SenorNoob]

According to descriptions on RockAuto 5/16 & 3/8. As for what to call that quick connect?

Edit: Looks like it's called an SAE quick connect.

 

[Uncle Gump]

EVIL ENERGY AN Male to SAE Quick-Disconnect Female EFI Fitting

EVIL ENERGY Aluminum 6/8AN Male to 3/8" 5/16" SAE Quick-Disconnect Female EFI Fitting has a working pressure of 1500PSI and a working Temp from -40°F to 176°F.It is secured with a plastic spring lock.Its' AN flare is sealed at 37 degree angle to avoid leakage.It has a wide range of uses

www.ievilenergy.com

 

[85_Ranger4x4]

According to descriptions on RockAuto 5/16 & 3/8. As for what to call that quick connect?

Edit: Looks like it's called an SAE quick connect.

I usually go to O'Reilly's website for that stuff and they didn't show anything.

When combined with Gump's post I find these that looks like you are correct:

https://www.amazon.com/dp/B0CZXQJZLX/?tag=959media-20

I think I have the main meat and taters of it rounded up now to string along orders for awhile.

 

[85_Ranger4x4]

EFI kit is here!





Machine work looks nice





It has a progressive throttle. Kind of like my carb the fronts open first but they are more linked to the rears, having them both open opposite directions makes for a cool visual effect.



The wires that need attached to other things area all clearly marked



Has a baggie with the mounting gasket, I figured it would come with the air cleaner stud but I was mildly impressed it came with mounting studs. I don't think I need more of them but it was nice.



And another bag with a keychain, more stickers, small hardware, firewall grommet/mouse access hatch, and a USB adaptor.

 

[85_Ranger4x4]

The time is drawing near, I hope to get rolling on this process this weekend.

I think I have pretty much all the parts I will need, not sure how the fittings will play out but there is no way to know here for sure. And here I thought my tote was too big...



I was going to drive it into my garage and revamp the fuel system first. My door is against one wall so I only really have room on one side of the truck. And then we will have to use a feature I am getting rid of... and use the fuel in the bowls to back the truck out and turn it around and back it in so I have more room to get to the front of the truck for the rest of the conversion. To do aid in this I pulled the spare tire carrier off the back to make the truck almost a foot shorter. It is tempting to pull the grille guard/winch off but I am gong to try not to.



I was initially gong to retain the Duraspark igntion, I decided to just jump to using the built in coil driver that will use the OE style E coil. So I rooted around in the barn and found my bracket. I need to sandblast and paint that yet but we have time.

 

[PlumCrazy]

Bump

Trying to figure out how to mesh generic fuel line (Evil Energy) to my current fuel pump hanger assembly.



Aces injection kit is en route...

Any of the kit they have in help section at the box stores will work if they look like or the 90* version of these: https://www.oreillyauto.com/detail/...-fuel-line-repair-kit/doe0/800063?q=fuel+line

 

[85_Ranger4x4]

Any of the kit they have in help section at the box stores will work if they look like or the 90* version of these: https://www.oreillyauto.com/detail/...-fuel-line-repair-kit/doe0/800063?q=fuel+line

I now have the regular ones that fit the braided fuel line.

I just have to drop the stupid fuel tank again. I swear for one reason or another it is getting to be an annual event anymore.