dmaloney
New Member
- Joined
- Mar 29, 2012
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1990
- Make / Model
- ford
- Transmission
- Automatic
i have a 90 ranger 4.0 2wd reg cab and my turn signals are not working.
i have replaced both flashers and if i replace the fuse as soon as i install one and hit the switch the fuse blows. i have replaced both rear turn signal sockects due to a residue that looked like it could have been shorting out the fuse, yet it didnt fix it. i have the multi funtion swith removed and cant see and burn marks or any indication of a short. i am just looking for ideas at this point and any help would be appreciated thank you.
i have replaced both flashers and if i replace the fuse as soon as i install one and hit the switch the fuse blows. i have replaced both rear turn signal sockects due to a residue that looked like it could have been shorting out the fuse, yet it didnt fix it. i have the multi funtion swith removed and cant see and burn marks or any indication of a short. i am just looking for ideas at this point and any help would be appreciated thank you.