turn signal

The 3157 and 3156 are two widely used bulbs for turn signals, brake lights, and taillights. Have you ever learned about these two types of lights when you were picking out LED turn signals for your vehicle? Is there still some confusion about the difference between these two? Are you not sure...

I recently changed out my old incandescent taillight bulbs for new brighter and more reliable LED lights on my 2002 Ranger XLT 4x4 (with manual transmission and 4.0L V-6). Of course, this brought on the electrical load issue and my turn signals now do the “quick flash” of a failed bulb. I...

The T3 series from Lasfit represents a significant leap forward compared the previous T series. Lasfit T-Series LED bulbs offer high brightness and equipped with a built-in canbus decoder, eliminating the need for additional resistors, plug and play. Many customers have used Lasfit T-Series LED...

Greetings everyone! We are thrilled to be part of this forum and share valuable information to enhance your driving experience. At Lasfit, we are committed to prioritizing user satisfaction and improving the lives of vehicle owners. Today, we are excited to introduce our latest product, the T3...

Just wired a push to start in my ranger, all run functions seem to work except turn signals and brake lights. Which wire do I need to be focused on to complete that circuit? 1990 2wd 5 speed converted

So, I'm stumped. Passenger side turn signal works great, both headlights on and off. With headlights/running lights off on the driver side, i get only the front signal. With headlights/running lights on, on the driver side, I get no turn signal at all, and the indicator on the dash remains...

Hi! I'm having an issue with my brake lights staying on all the time. They have been staying on for about a month and a half or 2 months now and I haven't been able to figure out the problem yet. The problem started out as the lights just coming on and off at random, even as the truck was off...

Sounds like a desperation post lol. A ford tech will have seen these symptons (?) 2010 Ranger...base model....2.3 duratec/auto (140k)...has A/C. Other than exteded cab that's it. Crank windows, manual locks/windows, No cruise control...AM//FM radio, lol. (I'm a simple bastard that appreciates...

I have an 1986 Ford Ranger 4x4 6 cylinder FI with dual tanks. I have what I think are multiple issues but related. This may take a minute. The truck sat for a while waiting on a new clutch, pressure plate, etc. After having them installed I drove to the gas station and filled both tanks and...

This has been a quirk that I've grown accustomed to over the years but has gotten worse and is now a real annoyance. It's a multi-step routine... 1. Start & drive my 1990 Bronco II 2. Drives fine 3. Without provocation, Rear ABS light illuminates/turn signals become inoperative/battery stops...

Okay so I noticed my blinker wasn't blinking in the pass side so I checked all lights an found the rear pass light was out so I replaced the bulb and still no blinking or borage light on that side also the front turn signal comes on and stays on when switch is turned that way I'm stumped I was...

i have a 90 ranger 4.0 2wd reg cab and my turn signals are not working. i have replaced both flashers and if i replace the fuse as soon as i install one and hit the switch the fuse blows. i have replaced both rear turn signal sockects due to a residue that looked like it could have been shorting...