SOHC 4.0 thermostat housing upgrade

[DILLARD000]

I know this thread is a few years old. But I'm about to repl my plastic thermostat housing, was wondering if you might provide some addtl details about replacing these tensioners?

Why would you do this? And any links for a how-to?

Thank You!

Search function on upper right of this page, "Tensioners"
will get you many threads on this subject.

My own webpage on the Tensioners at

Engine Oil Pressurized TimingTensioners

As of this 2020 writing, I'm just dumb lucky, not having had any TimingChain component failure with this 20yr old V6-4.0L~SOHC engine; only issue noticed is momentary rattling during very cold morning starts. The recent removal of the lower Oil Pan & Pump Screen was clean, without any...

2001fordexplorersporttrac.fandom.com

 

[sgtsandman]

I know this thread is a few years old. But I'm about to repl my plastic thermostat housing, was wondering if you might provide some addtl details about replacing these tensioners?

Why would you do this? And any links for a how-to?

Thank You!

The tensioners prevent slack in the chains developing both by spring pressure and oil pressure from the engine. They wear out over time, thus why we recommend changing them every 70,000 - 100,000 miles.

If you don't eventually, they will not keep the chains tensioned, which will allow them to slap on the chain guides, causing accelerated wear and breaking pieces of the plastic off. The procedure for changing the guides is very invasive and will require that the engine be pulled out of the engine bay.

To see what is all involved, watch the videos put out by fordtechmakeuloco. It is a four part series on the job. Something you want to avoid if at all possible.

 

[JJMaine]

Platinum Productions on YouTube also has some good "down and dirty" videos on the 4.0 SOHC.

I think he was just asking about the hydraulic tensioners? I'm pretty sure those can be changed with the engine in. The drivers side you can get to easily while you do the thermostat housing and passenger side I believe is a little more of a pain but doable.

 

[Uncle Gump]

Do the passenger side through the fender well.