swap

Hey guys I just picked up a set of 225 75R 16 tires and im wondering will they fit on my 99 b4000 with no upgrades? Im currently running 265 75R 15's. Also with the tire swap would i need to get the spedo rechecked or whatever it is cause of the tire diffrence?

Howdy guys, this is my first post! I've had my ranger for a little over a year now, and she needs a new engine! Its a 93, and it has the 4.0 overhead valve engine, and I can get my hands on a 2001 4.0 for a real decent price. I've perused through the forums quite a bit now, but I still have a...

I have a 01 ranger automatic, its a 2.3 and doesn't give me what I need. I want something much bigger and have no idea where to start. I need to know from you all what I can do. Prices, which vehicle is ideal to take the motor from, and any specifics that I need. I don't have a large amount of...

ok guys running into issues on this swap first one i have ever done and need help here is what i have 85 ranger 2.8 5 speed 4x4 302 and trans that came with the motor. both came out of a 86 bronco having issues finding motor mounts. everything i find is 2wd..anyone know where i can find ones...

I can't stand having an open diff in my '01 Ranger! I'm looking for the best easy/cheap way to hook up my truck. Right now it's sitting on tiny 28" tires with a stock 7.5 with 3.73s and the open diff. It gets me around but, having an underpowered 4-banger, I don't really want to push the 33"s...

Hey Guys, I've built a little camper trailer, I rebuilt a motorcycle, now, I want to build a turbo diesel Ranger. It's my next and biggest project yet. I've done research, and the 4D55 sounded like the best option. I'm sure there will be a couple guys roam in here and compare it to the 4BT...

Ok so this is what i AM going to do and i dont care about your negative criticism i just want positive ok. So what i am doing is getting the tom morana racing stroker kit to make it a 3.3l and i am going to be getting the m90 or m112 supercharger and maybe a water meth kit but thatd be later...

I just wanted to make sure before I spend the money, but i've found an FX4 Level 2 in the junkyard 04ish with 87k miles, It's geared 4:10. I just want to know if theres any major problems i will have with bolting it in my truck (94 4x2 5 speed I have a 7.5 geared 3:73 open now)I assume the...

Hey! I'm Luke, and I'm planning on doing a 3.0L SHO swap into a B3000. I stumbled across TRS during my scouring of the interwebs for builds on this sawp. I will take all the advice and input I can get, but I plan on carrying this all the way through! :icon_welder: So please: any and all...

I have a clean 85 bronco B2 with a bad a4ld transmission and was thinking I would like to swap to a manual but would prefer something beefy and a better engine to go a long with it. I have been looking into different small diesels that I can swap over for mileage and decent torque. I read in a...

I have a 1988 Ranger XLT 2.9, Im wanting to do a 302 swap. What Year of motor and trans would fit the best. It has a 2 inch body lift on it now.

So, I have an '89 Bronco II with a 44 rear end. I also happen to have a '90 bronco II I use for parts, which has a D4 limited-slip. I want to do a swap so I can have the L/S rear-end, but will it last? Do they wear out quickly? Or should I skip all of this and just have one installed on my...

In the next few weeks i will be swapping the 2.9 in my B2 for a 302. I have searched and read most swap threads on here. I've got a ZF-5 for a transmission to put behind this motor but i can not find the inspection plate/dust cover anywhere. I've checked online and through local junkyards but...

I have the original bench seat in my 83 ranger and their getting really bad! I was wondering what my options for seats for my ranger. i was really looking for a bucket seat setup. is this possible for an 83 ranger.

Hey, i have a 1994 ford ranger 5spd that has the worst electric shift system ever, i seriously hate it, i've owned the truck for over a year and in all that time it hasn't worked once, now i've done everything short of putting a new wiring harness in and i decided it's time to approach it from a...

On vacation my transmission died ( wont run out of second gear ) and I'm just wondering I have a 98 ranger v6 4wd switchable 2.8 or 2.9 can't remember now can I swap it out with any auto tranny past 95 when they changed them or are there certain things I have to look for? Also can anyone...

Got a 91' 4.0l XLT that I swapped to a 5.0L H.O. and currently running a C4. Very motivated to get a T5 but I need info before I make any progress. Any info about installing clutch pedals in a 91'? Seen plenty info on setting up the bell with slave and lines etc... But I need to start from the...

Hey guys, I have yet another obscure question that probably will never get answered. The steering wheel in my 01 Ranger is pretty much falling apart. I was looking at replacing it, but figured while I was there lets try and upgrade it. I was thinking about swapping in an 05-09 mustang wheel or...

I have a 1986 Bronco II with an A4LD Transmission. It has a smooth 1-2 shift and the shift from 2-3 is a very high rpm (4500 roughly). After the 2-3 shift, it will not shift to 4th at all. I did not have my 2-3 shift and then I replaced the shift modulator and got that back. I have two routes I...

My 94 Explorer currently has a M5OD/1354E and I want to swap to the 1354M. I've found one from a 96 Ranger with an M5OD/1354M, but using the search bar leads me to ask a few questions... 1. My current factory D-Shafts should be plug and play? 2. The pigtail for the indicators on the dash: plug...