ranger

I took the compressor off since it doesn't work but don't know what to do about the two hoses connecting to it can I just take them off?

I have a 1989 Ford Ranger XLT Automatic that Only 3rd Brake is not Working! The Rear brakes function fine. The wire going to the 3rd brake light is a Black/Pink. Which on the electrical Diagrams is shown as being also used by the reverse lights. I have not been able to find any electrical...

This will be a long post, but I’m reaching out becuase I have no where else to turn. I’ve read pretty much every thread on the internet pertaining to the problem I’m having and nothing has worked. So here’s the problem... idles slightly rough. When I put it into drive it’ll drop idle to like...

86 2.3l will crank but not fire. I bought this truck from a guy that states "the fuel pump relay went out" replaced the relay and it still wont fire. I have jumped the inertia switch for GP. Here is my current status: Ignition on: no fuel pump prime. however, 12v power applied directly to the...

Hey everyone, I've searched around but couldn't find a straight answer to this; I need to replace the transfer case shift motor on my 2007 Ranger 4.0L, and I've found two parts that look like they should work: the Dorman 600-807 and the Dorman 600-931. Websites say that you need the 600-931...

Looking for 1991 passenger ranger door with power, I will pay for shipping if I can't drive to you Thanks Ron

i recently bought a 2002 ford ranger 5 spd manual with the manual transfer case. (i dont know if thats rare or not) . I ended up having to replace the passenger side front hub assembly and the half shaft. The problem arose when i went to take the half shaft out. I got the end out of the spindle...

What engines will swap into a 2003 ford ranger edge 3.0l? I'm up for anything even if it's not ford

Hi, my alternator is currently going on my 2003 ford ranger edge 3.0L. if I'm not mistaken I have the 95A alternator. I have an aftermarket audio pieces in my truck. Will the 130a alternator from a 2004 ford escape 4.0L fit my truck? I have one available near by. Thanks in advance

Hello everyone! Just made an account here and this is my first post on TRS, though not the first ranger I've owned. My current '91 Ranger is only temporarily mine, I bought it for $300 as a gift for my dad, cleaned it up and got it running. Now I'll be driving it while I'm back at school and...

Hi guys, I made a thread about this a while back when I was less informed about the problem I am currently dealing with, ill try to explain this better. So here's the issue, I have an M5OD transmission out of my old Ranger and I want to put it into my Bronco II. the Bronco has an a4ld trans...

Not the right section but I need the traffic, move it if you want. So my girlfriends taurus is stuck in colorado springs due to stupid circumstances. I have a 1994 B4000. Not in the best condition. However the engine runs strong. I pulled a bumper pull with a mower and grossed 7K+ and had...

Hey y'all! I need to preface everything by saying that I know next to nothing about cars or trucks, much less how to fix them. The only thing I'm smart enough to do is realize that and ask people who know what they're talking about, so hopefully I can find that here :) I drive a 1998 Ford...

I have a manual 2.3 ranger that is just gutless. I have a wrecked f-150 with the 4.2 in it. I'd like to put the 4.2 into the ranger and I was wondering what kind of mods I would need to do to make it work since I can't find anyone else who has done this particular swap. The reason I want to do...

I brought home a used 1988 Ranger custom with 70XXX miles. It's missing some piping under the battery. The fella I bought it from said it was part of an emissions system. Should I replace it? What is it? Could it be causing my wandering idle? See attachments.

Hey everyone! So I’ve got an 83 ranger, recently bought. The owner previous to me did an axel swap with the Dana 30 off a 97 Jeep. The track bar bracket is not welded square to the frame and is sitting quite off center, as I found out when I took it in for an alignment. The old guy I...

Hey everyone! This is my 1997 Ranger XL with the 3.0, 5 speed manual and 4wd, and a 7' bed. This truck is my daily driver, so this isn't going to be so much of a build thread per se, but I will be doing some light modifications and thought it might be cool to document my process! These...

I was given a 3.0L V6 from a 99 Ranger. Included was the ECU, Engine wiring harness, and 5speed trans. (I have an under hood fuse box and wiring harness from a 98 Explorer.. Pinning appears to be close). Originally I was going to keep engine as a spare for my rebodied 2003 Ranger (has 1940 Ford...

Hey guys, I'm looking for some help and this is a strange one... Recently I did a bit of work to the cooling system on my 1997 Ford Ranger 3.0 XL, and after the work I now have a vibration/shudder/rumble that occurs at 3k rpm and up. What's weird about it is that prior to doing this work, I...

Hey Guys, I seem to have a coolant leak coming from the connection of my lower radiator hose (engine side) on my 2002 Ranger Edge 3.0L. I'm looking to replace the factory spring-type clamp with a worm-type clamp, and was wondering if it would cause any problems or hose damage if I just leave...