Lift Kit ID help needed

[fyre82]

Hey guys, I need some help to identify what brand lift is on my 2K Ranger 4x.


Best as I can tell it is 6" lift, anyone recognize the style of the lift box? I can't find a mark on any of the parts other than the part number on the knuckle.
I am in need of a left lift knuckle as it got a bit ground off when a wheel parted from the vehicle at 60 on the highway, fortunately no other damage to my or others vehicles or persons.
Thanks
Rich

 

[SenorNoob]

According to the tech articles, Superlift was the only lift manufacture for that style suspension until 2018. So that would seem most likely.

Maybe I'm looking at it wrong, but I don't think those are torsion bars in the last pic. More like stabilizers. Note the bolt thru both ends. Also, I see coils in the 3rd pic.

Feel like I'm missing some information...

 

[Snoranger]

It looks like a RCD.

 

[fyre82]

You are correct Senornoob, the torsion bars are removed, those are coil over Bilstien.
I stumble with jargon...
What is it you feel you are missing? I'll do the best I can.
I'll research with superlift and RCD.
Thanks

 

[SenorNoob]

This is the point where I admit I don't know enough about the "newer" models to be more helpful. Sorry.