steering knuckle

I am looking for recommendations on a JB Weld or similar that can weld a nut on a metal sheet so that I can screw in a bolt. Which JB weld or similar is know to result in a metal like weld? Was reading about J-B Weld SteelStik, is this known to cure as such? While installing a running board one...

Does anyone know if there are any compatible steering knuckles I can use to replace my old ones. I have a 1990 Bronco II 4x4 with a Dana 35. My current steering knuckles are pretty rusty and I want swap them out

In the process of rebuilding my 2002 FX4 front end, I have replaced almost all the parts with the exception of the lower control arms/torsion bars and the knuckles and hubs/bearings. The control arms, hubs/bearings, and torsion bars are in good shape, but the knuckles had a coating of surface...

Hey guys, I need some help to identify what brand lift is on my 2K Ranger 4x. Best as I can tell it is 6" lift, anyone recognize the style of the lift box? I can't find a mark on any of the parts other than the part number on the knuckle. I am in need of a left lift knuckle as it got a bit...