tomranger
New Member
- Joined
- Jun 3, 2016
- Messages
- 12
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1993
- Make / Model
- Ford
- Transmission
- Manual
so the other day i was driving and felt something pop, turns out it was the upper tab on the passenger side steering knuckle that holds the inner brake pad in place, snapped clean off. fabricated a new tab, welded it in place. a few miles later snapped off again and lost all brakes, almost crashing in the process. at this point i believe i need an entirely knew knuckle for that side? anyone know where to find this? or have one for sale?? this is my only vehicle, as of now have no way to get to work or anywhere so any help is greatly appreciated! I am located in CT and am willing to pay for a fix!
can anyone confirm if the knuckle is made of cast iron or cast steel please?
i added a picture showing the tab that snapped off. I DO NOT have the tab, i attempted to fabricate and weld one out of steel but the weld did not hold at all. Should i consider trying to MIG weld again with a wire that is specifically for use with cast iron? would brazing be a better option? i would prefer to not have to take the entire knuckle off, considering the labor that would require (ball joints, etc..) but i already almost crashed once due to a bad weld failing. any help is greatly appreciated! this is my daily driver!
can anyone confirm if the knuckle is made of cast iron or cast steel please?
i added a picture showing the tab that snapped off. I DO NOT have the tab, i attempted to fabricate and weld one out of steel but the weld did not hold at all. Should i consider trying to MIG weld again with a wire that is specifically for use with cast iron? would brazing be a better option? i would prefer to not have to take the entire knuckle off, considering the labor that would require (ball joints, etc..) but i already almost crashed once due to a bad weld failing. any help is greatly appreciated! this is my daily driver!
Attachments
-
70.1 KB Views: 487
Last edited: