M5OD tail shaft

[chewy012]

Doing the clutch here next weekend. The drive shaft doesn't have a flanged connection to the tranny. Is it just a splined slip shaft that pulls out?

Also, if so, does the tranny need to be drained?

Sent from my XT1254 using Tapatalk

 

[chewy012]

Sorry, 92 4.0 5 speed 2wd.

Sent from my XT1254 using Tapatalk

 

[adsm08]

It just pulls out. You don't have to drain the trans, but you will probably loose some fluid out the rear if you don't. Unless you can find the correct butt plug.

 

[Captain Ledd]

If you're up on ramps you might lose some more, I didn't loose more than a few drips when I pulled my driveshaft a while back. But yes, it just pulls out and you don't need to drain it.

 

[chewy012]

It just pulls out. You don't have to drain the trans, but you will probably loose some fluid out the rear if you don't. Unless you can find the correct butt plug.

I'll go peruse through my collection. Thanks for help guys.

Waiting for the parts to ship.... Ugh. Next weekend can't come soon enough

Sent from my XT1254 using Tapatalk