Shran
Junk Collector
TRS Forum Moderator
Supporting Member
Article Contributor
V8 Engine Swap
Solid Axle Swap
Truck of Month
- Joined
- Mar 4, 2008
- Messages
- 8,720
- Reaction score
- 4,844
- Points
- 113
- Location
- Rapid City SD
- Engine Type
- V8
- Engine Size
- 5.0
I'm using Nason 2K primer, and urethane base/clear from TCP global.
Sprayer, I have two of the $10 purple HVLP guns from Harbor Freight. I have a 60 gallon compressor with a oil/water filter setup on it - works great.
I'm pretty pleased with the HVLP sprayers. They are kinda cheap feeling but as long as I've kept them clean and lubed, they have worked pretty well. I think I could get away with a smaller compressor, especially since I'm just shooting one or two panels at a time.
Sprayer, I have two of the $10 purple HVLP guns from Harbor Freight. I have a 60 gallon compressor with a oil/water filter setup on it - works great.
I'm pretty pleased with the HVLP sprayers. They are kinda cheap feeling but as long as I've kept them clean and lubed, they have worked pretty well. I think I could get away with a smaller compressor, especially since I'm just shooting one or two panels at a time.