Welcome Visitor! Please take a few seconds and 
- Joined
- Aug 19, 2001
- Messages
- 10,757
- Reaction score
- 583
- Points
- 113
- Location
- So. Calif (SFV)
- Vehicle Year
- 1990
- Make / Model
- Bronco II
- Engine Type
- 2.9 V6
- Engine Size
- 2.9L V6
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Tire Size
- 35x12.50R15
Talking the low-stance 2WD XL/XLT with A-arms and coil springs, not the torsionbar model.
Was looking at one the other day and I started wondering if the way the coil pockets are actually built into the framerails themselves would lend themselves well for a radius arm SAS (converting to 4WD at the same time obviously).
Anyone done this and have any pics to post? All I've been able to find are SAS'ed 4WDs and the occasional TIB 2WD.
Was looking at one the other day and I started wondering if the way the coil pockets are actually built into the framerails themselves would lend themselves well for a radius arm SAS (converting to 4WD at the same time obviously).
Anyone done this and have any pics to post? All I've been able to find are SAS'ed 4WDs and the occasional TIB 2WD.
