racer1044
New Member
- Joined
- Aug 24, 2010
- Messages
- 154
- Reaction score
- 0
- Points
- 0
- Location
- Marquette, MI
- Vehicle Year
- 89
- Make / Model
- Ranger
- Engine Size
- 2.9
- Transmission
- Manual
I ended up taking the rear shaft out of the 94 ranger with the 8.8 flange and used it with the original shaft. I split the two at the slip yoke and used the bigger shaft and slipped it in the original shaft and put on a new clamp.