madranger84
New Member
- Joined
- May 2, 2016
- Messages
- 30
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1984
- Make / Model
- Ford
- Transmission
- Manual
I am building a 5.0 ranger with the np435 transmission. i can not get the clutch to disengage all the way. i have the bell housing and external slave cylinder from a 1985 ford f150 and the stock 84 ranger master cylinder. I've bled the slave cylinder to the point where I have a pretty hard pedal but the pedal still hits the floor before it is fully disengaged. I even tried shaving some of the pedal off where it hits the fire wall to give me an extra bit of push room but the clutch still won't disengage! any help would be great but I need it quickly please and thank you!