I have an 89 ranger 2.9, automatic, push button 4x4, power windows, power locks. I need a full engine bay wiring harness that's not all hacked to pieces. and possibly a computer with those options as well...thanks... call or text, ryan, 734-717-9247. text is best. I have cash money.
Okay guys, I have been tinkering around on my 4X4 trying to figure out what it will take to fix it. The CM self diagnosed itself OK, but any time I touch the button on the dash I don't hear anything from the transfer case or shift motor. Is it possible that it's just the shift motor? And not a...
Hey this is my first time posting. I have had several rangers over the years. All first gen rangers currently I'm rebuilding a 1985 ranger 4x4 standard. I have a bit of work to do. The alternator was wired to the engine by a monkey. Bypassing everything. I need to rewire the regulator just...
Here's what I got. 89 ranger xlt ext cab 2.9 4x4 automatic
Here's what's new...or rebuilt...
Rebuilt engine. Less thank 500 miles
Rebuilt trans & t-case
New injectors
New map sensor
New 02 sensor
New fuel pump
New radiator
Cat cut off
Most sensors are new...I've done so much to it that I...
Hey guys,
I'm doing some research on converting a 2002 Mazda B3000 Dual Sport from 4x2 to 4x4. I know everybody says that this is too hard to justify, and that it's better to just sell and save up for a 4x4, but hear me out :)
First of all, I've heard that changing a rear-wheel drive to 4wd...
Ok, long story short, its cheaper here where i am to purchase a used explorer front driveshaft for my Dana 35 conversion. i got the three of the four bolts out, the three that use the star tool, and how do you get the one that is a regular hex bolt out, or is that bolt just filled with rust and...
So the bearings are going on the front end of my 2000 ford ranger 4x4. I just order new hubs/w bearing but I am not sure if I got the right parts. This is what I ordered from rock auto http://www.rockauto.com/catalog/moreinfo.php?pk=4287453&cc=1362798
I guess I really wanted to know if those...
started out as a 2wd 3.0 body lift custom rack and bumper 4.10 8.8 10in drums and 31-10.50 15s I bought for 2k with a bad motor threw in a used 3.0 for 250 bucks drove it for the summer and the dreaming/planning parts finding began...
So I went off roading and launched off a jump in my prerunner and cased the landing, I bottomed out my rear susspension enough to buck my rear wheels off the ground and nose wheely for a few feet. After that I went to step on the throttle to keep going but my truck would just rev as if it was in...
i have the good ol' push button for 4x4, but i cant remember entirely if its powered by the ECU or the button itself (gets power from the ecu but it operates itself) believe it does. think i found the someone talking about it on here a while ago but i cant seem to find the thread again. im...
I have a 92 xlt ranger that has had problem after problem with the 4x4. The hubs went first, and i put some sturdy manual hubs on. It worked fine for about a year. Then the shift motor was thrown out of sync, which is apparently common. After breaking a tamper proof T20 head on the motor case i...
My 4x4 went out and I just finished replacing the shift motor on my 92. I tried the 4x4 and it engaged fine while i had the key turned. Took it out for a test drive and it wouldn't engage. Checked the module and it is now giving me a solid (something is wrong) red light. What would've caused this?
Hey i have an 87 ranger with automatic trans with overdrive
On the highway it seems to jump in and out of over drive
It has a new filter and fresh fluid
I figured it was the servos? but you cant even get them from ford anymore
Any Help or advice would be awesome!!! love this forum wouldnt...
Just my 99 2wd 3.0 updated big drum 8.8 ranger axle with 4.10s, 31's, on steel wagon wheels, body lift, nice headlights and tinted lenses all around custom rack and bumper, Lund fiberglass add ons, custom CAI, gearing up for a 4.0 4x4 frame swap from a wreaked 2000 I picked up, both are manual...
Hello to the helpful members of TRS,
I have a 1998 Ranger Extended Cab 4x4 3.0L 5-speed, torsion bar front end, 155K miles, and it is now way past due for lower balljoints, and upper control arms/balljoints.
I recently moved from Ohio to Texas, and having gone from a house to an apartment, I...
Just saying hi and getting started on this forum. Just purchased an 86 4x4 with 2.9L auto, just a good ol truck to play and hunt with but amazingly almost everything works on this truck. It started its life as an XLT and in 86 that was top of the line. The truck runs decent and I am doing the...
Hey Guys,
I've built a little camper trailer, I rebuilt a motorcycle, now, I want to build a turbo diesel Ranger. It's my next and biggest project yet. I've done research, and the 4D55 sounded like the best option. I'm sure there will be a couple guys roam in here and compare it to the 4BT...
I have a 99 ranger xlt 4.0 5 speed and my 4x4 lights flash 5 or 6 times randomly, the 4x4 does not work, I know the switch is good and the gem mod is good, I'm thinking the problem could be in the wiring but I'm not 100% sure, has anyone else had this problem?
Hello, I have a 1994 Mazda b4000, and I've replaced about every single thing on this truck from the engine to transmission, to radiator and alot of smaller things. But the problem I'm having is that when I put it into 4x4 (which works good) it makes a grinding noise from the front end. This...
I have a 1991 Ranger 2.9 v6 5 speed manual 4x4. When i try to start the engine, the EEC fuse blows. The first time was 3 months ago, it happened while i was driving, i could not find any shorts in the wiring. I took it to my local auto repair shop, and they could not find anything wrong with it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.