4x4

Hi All, Part questions, part edjumuhcation, it's ...questi-muhcation! I have a 99 3.0L 4x4 off road Ranger bought two months ago. When I bought it the ABS light was on. Since the rear speed sensor (VSS) seems to be a common cause & cheap part, I figured I'd start with the low-hanging...

Howdy bonjour buenos... First time ranger-owner-DIYer in Miami, FL, looking to get to know how cars work by means of a '98 XLT 3.0L V6 4x4 5-speed. Blows my mind how many rangers roll around this city, if you watch you can spot 5 a minute easy. Got dragged on the buying price but after diving...

im just curious as to what all the transmissions and bellhouses that will fit on a 302 windsor underneath my 1992 ford ranger ext cab

4x4 Module Pin Out/Wiring Diagram Hello, this is my first post! I have read around this site and many others and still cannot find exactly what I need. 98 Ranger XLT-4.0-5spd My 4x4 high works fine. I can switch between 2wd and 4x4 high with no problems. It will not however switch into 4x4...

Hello I am new to this forum but am desperate for help. I have a 99 ranger and the abs light is on speedo doesn't work o/d light flashes and it shifts hard. I have already replaced the speed sensor on the rear end twice thinking maybe the first one was bad. I've checked all the wires and...

I have looked at my local cregslist page and on the Internet for a 2.3 liter engine but all I can find are either performance parts or full cars that will cost me way to much just to pull the engine out of and part out the rest. Does anyone know of a website that sells them? Also I know being...

This is going to be my build thread for my 91 Ranger "Bumble". The name came about because the suspension was so worn out when I bought it that it bounced off-road. And from the Rudolf the Red Nosed Reindeer Christmas special, we all know that "Bumbles Bounce!" I have owned it for just over 2...

I've been doing some research into doing a 4wd LT upgrade from Dixon bros/Vegas desert fab and I pretty much know what I need to do for the front, but I still am a little confused about the rear. Is there such a kit where I don't have to cut the bed? such as just upgrading the leafs and shocks...

i have a 93 ford ranger 4.0 4x4 5speed that i bought, the kid said the pcm was bad and he put a different one in the truck and it is the wrong one, how do i find out what pcm i need without having the original pcm for the truck?

:popcorn: The Ranger is gone, long live the Explorer! As most of you know, after the adventure that was my first Ranger (the '98) I went on and picked up a '93 Ranger. And it was a great truck. Sadly at 250,00kms it was getting a little long in the tooth. I dabbled in a new car to haul around...

I have a 97 ford ranger that i am working on putting a 460 in with a 4 speed transmission and a np205 transfer case. I have a dodge rear dana 70 for it and a front heavy duty dana 44 out of an f250 for it. I plain on making a detailed build about this with pics of it as I go so hopefully it will...

Help me please, I dont know what else to do!, So, I re build carb a few months ago, and it was running great!. I Also did a major tune up and other items as time went on. (solenoid, fuel pump, oil pressure sensor, starter, water temp. sensor,...) The last time i changed something was the...

Bought a 01 ranger 4x4 with a 4.0 and auto trans. Read several posts in these forums on the control module issue. I have 4wd no lights, no clicking in the cab. Bought a used unit from a salvage yard, plugged it in and blew the brake switch fuse. My fault I didn't know to disconnect the negative...

Where is the transmission vent located on a 2000 ranger 4 liter, 4x4, with automatic transmission? I would like to relocate for water crossings.

I just got an '84 ranger and was wondering what kind of cool swaps and stuff I can do with it? It's got the 2.3L 4 cylinder in it now and I want something with more power. Thanks

I have read tons of info on doing the 302 swap, I would love to swap one in my truck, however I am still wanting to keep the 4x4 for the winter out here in Iowa. can I use my current transfer case and rear end and front axles? or would I need to find a full size f150 with transmission transfer...

Hey guys, i just recently bought a 06 FX4 and lately its been making this funny noise.. If either of the wheels are unloaded, i hear a whining noise from the rear axle, and if i back up theres a slight pop noise? other than that the truck hums along fine, theres no jolting or such, only when...

just bought a really nice 93 ranger 4x4 automatic 4.0 I pulled apart the panel under the steering wheel looking to figure out the shift linkage( fixed it btw...score..) anyways all the gauges DID work... now ... battery gauges reads dead oil pressure gauge reads so high that its over the H...

heres the scoop. 93 ranger xlt 4.0 4x4 automatic with auto hubs just bought it. redoing front wheel bearings, rotors, calipers. one of the " single hump locking key" 's was broken. im not converting it to manual hubs. its gunna be girlfriends truck and that's too complicated for her to...

Yesterday I took a look at my bearing because they were getting loud. Come to find out that the washer between my two lock nuts broke. (lock nuts I am talking about are here). The nipple on the washer that keeps it from spinning on the spindle broke. The metal that broke off obviously went into...