My "fix"
This is what I did.
I removed all the external junk, and the vacuum canister. The mounts had been broken long ago. The air box was just sitting there. I then opened up the back.
I then made new mounts so that the box would be mounted solid.
I had a few gaps that were causing snow to come into the engine compartment so, I fixed them.
Below are the fixes.
I want to add a piece of small, light angle to the bottom of the first one.
I also need to do the same to the other side.
The 3/8 hose with the vacuum tee that you can see in the second pic is my axles/tranny/transfer vent.