07 engine removal confusion...

[SenorNoob]

See if you can get in there to tell what wire colors are on those connectors. That's help figure out what they are.

 

[Fscott4]

See if you can get in there to tell what wire colors are on those connectors. That's help figure out what they are.

I figured one of them out. It goes to the crank sensor on the bottom front. I will try to get on the other one and see what colors they are.
I am wondering if the wires on the one Ive attached can be spliced? I should have routed it before putting the front of the engine on and its gonna be a bear to get it down there if I cant splice it.
I appreciate your help with this!!!

 

[SenorNoob]

I wouldn't a crank sensor if there is ANY other way. AFAIK those are like ethernet cable with a required number of twist per foot.

 

[Fscott4]

See if you can get in there to tell what wire colors are on those connectors. That's help figure out what they are.

Good morning!
I did get the crank sensor routed this morning and now the 1 wire is left. I was able to pull the cover back and one of the wires is white and the other is pink and purple.

 

[Fscott4]

I cant find this on any schematic

 

[Roert42]

Where is your knock sensor wire?

Normally the connector is attached here with a Christmas tree.

 

[Fscott4]

WOW!!! the knock sensor is on top of the engine beneath the intake manifold. A thick disc shaped piece with a bolt thru the center and a pig tail with a connector. I think that may be where the problem lies...
Im gonna head back out and have a look...
will keep you posted!
Thanks

 

[Fscott4]

dropped a wire down under the intake and fished it right out!
Thanks!!!
now have to do the exhaust crossover, fluids, prime the oil pump and fire it up