MRLUKE
Member
- Joined
- Sep 26, 2010
- Messages
- 10
- Reaction score
- 0
- Vehicle Year
- 1985
- Make / Model
- FORD
- Transmission
- Manual
person that did the write up on duraspark conversion in this site did a great job! need help on the following quote:
"Plug #1) 2-Wire Duraspark type female round plug with a Red/Light Blue wire and Light Green wire going in. The Red/Light Blue wire has power in the START position.
Plug #2) 4-Wire Duraspark type female round plug. The 4-wires are:
2 - Purple/Orange wires - Power to the back-up lamp switch.
1 - Red/Light Blue Stripe wire - Part of cranking circuit with key in START position.
1 - Dark Blue wire - No longer used
Plug #3) Gray rectangle plug with a Red/Light Green wire. The Red/Light Green wire has power in the START & RUN position."
Which side of each plug do I use? The side closest to driver firewall, or side of plug leading to passenger side across the engine?
"Plug #1) 2-Wire Duraspark type female round plug with a Red/Light Blue wire and Light Green wire going in. The Red/Light Blue wire has power in the START position.
Plug #2) 4-Wire Duraspark type female round plug. The 4-wires are:
2 - Purple/Orange wires - Power to the back-up lamp switch.
1 - Red/Light Blue Stripe wire - Part of cranking circuit with key in START position.
1 - Dark Blue wire - No longer used
Plug #3) Gray rectangle plug with a Red/Light Green wire. The Red/Light Green wire has power in the START & RUN position."
Which side of each plug do I use? The side closest to driver firewall, or side of plug leading to passenger side across the engine?
Last edited: