Which years are interchangeable?
- Thread starter elj51
- Start date
-
- Tags
- fit five speed ford ranger transmission
- Joined
- Nov 26, 2009
- Messages
- 270
- Points
- 3,101
- City
- New Jersey
- Vehicle Year
- 1983, 1977
- Transmission
- Manual
The 90 trans is a mazda 5 speed. The 86 is a mitsubishi, it bolts up but I'm not sure if it is a direct swap.
- Joined
- Dec 1, 2007
- Messages
- 689
- Points
- 3,101
- City
- Lake Almanor, Ca.
- Vehicle Year
- 1988/2000
- Total Lift
- 9" on the 2000, 6" on the '88
- Tire Size
- 265/75/16, 31x10.50x15
- My credo
- The memories of a man in his old age are the deeds of a man in his prime
You will probably have to swap the clutch master to slave hose to go from the QD to the top load pin and seal connection if the trans is an FM145.
The hose comes off the master with the removal of a pin. Do yourself a favor and replace the O ring when you do this.
Easiest is to replace the master with the new slave so you can do some of that on the bench. New masters are way easier to replace without the push rod in it. That particular system will bleed relatively well by gravity.
The hose comes off the master with the removal of a pin. Do yourself a favor and replace the O ring when you do this.
Easiest is to replace the master with the new slave so you can do some of that on the bench. New masters are way easier to replace without the push rod in it. That particular system will bleed relatively well by gravity.
- Joined
- Apr 6, 2011
- Messages
- 165
- Points
- 1,601
- Vehicle Year
- '89
- Transmission
- Manual
Couldn't it also be a TK5? He might also run into the issue of the driveshafts being different lengths.
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
