ranger

I need help identifying this transmission. It was given to me and I was under the impression it was out of a 80s Bronco II (A4LD) Looking at it now, it looks more like a AODE or 4R70W. I can’t find any casting number other than on the t case adapter (pictured) Anyone familiar with these...

I have a 2WD 2011 ford ranger and I want front recovery points It does not have the cross section across the front frame rails. Anyone come across this? Something custom built or retrofitted to work as a recovery point on the front.

A shop quoted $800 to paint just the hood and roof of this 98 Ranger. That's just not feasible. Am more more interested in DIY solution. I don't have a problem to sand and paint. Is there a spray can manufacturer who makes color matched paints? If not what are your ideas on how you can go about...

Hello Ranger enthusiests, I have a 1993 ford ranger 4.0 OHV engine with limited technology. I recently got a new Remaned engine and i didnt take off the oil pump drive gear from my old engine. Im trying to figure out hwere to find one but it seems they dont exist. The Part number i got was 6A739...

As the title says: Stock manifolds/extractors off a 2.8. Both sides. No cracks. Bolts came off nice. Will send pictures if interested. Located in Atlanta, but will ship at cost(should be $30ish for most places) $75

I have a 1984 Ranger that originally had the 2.8L, but over the last winter, my grandpa and I did a 4.0L swap in it. It's been good for the most part. Little issues here and there. But the other day I was driving it, and mid-drive, it just started cutting out and missing really badly. It got to...

Hey guys. I've rebuilt my 88 ranger 2.9 l from top to bottom. My engine is running rich. I've replaced the idle air control valve, the o2, sensor, the pressure regulator twice, New injectors, New coolant sensor, map sensor twice, the computer and I've also shot all the wires. I did fuel pressure...

Hi guys, so I have an 03 Level 2 with the manual trans/manual transfer case combo. Have not driven it much since I just rebuilt the engine, and the only time I drove it prior to the rebuild was when I drove it home from the sellers house. I’ve noticed it makes a rattling noise coming from under...

Hi, I dont have access to another ranger with AC and the nearest junkyard that * maybe * can help is 50 miles away. I just need to see how things fit together, since I lost the vacuum reservoir (don't ask how) and part of the tubing, and I'm not sure what to order. Here's what I got. The...

I'm new to posting on threads and not really sure how to do this but I am running into some hiccups on a swap. I have just swapped a junkyard 4.0 into my junkyard beater ranger that I use to go trail riding with my jeep buddies ( It does way better than the jeeps, even the new JL's ) but after...

Took these off my ‘94 Ranger. 5x4.5 bolt pattern. 7” wheel width. 15” wheel diameter. Not the prettiest set of wheels/tires. Could use some cleaning. But they’ll get the job done. Tires don’t have much tread left. Could be good burnout tires. All come with chrome caps. $100obo. Can deliver...

Set of (4) 1.25” wheel spacers. They were installed on my Ford Ranger but never driven. Ended up going a different route with the wheels. There are a few cosmetic blemishes. But overall in like-new shape. All spacers come with lug nuts. $75obo. Can deliver locally at a reasonable distance. Can...

Jegs part #014-7805-1121-1 Aceon ignition kit for a variety of Ford Engines. Comes with 8 platinum plugs, two coil packs, and 8 spark plug wires. Compatible with the Ford 2.3L 4-cylinder, as well as the 4.6L & 5.4L V8s. Bought these for my 2.3 Ranger. Don’t need them anymore. Only time the...

2.9 v6 , 4" suspension lift , 3" body lift , has 31" tires in these photos , the 33's in back will be on as soon as the bumpers are raised, Kenwood CD player , 2 Gothic 10" subs , 1 American Bass 10" sub , Precision Audio rzr 2500 sub Amp and a Profile 1500 sub Amp..Pics with 33's coming soon..

Hey gang. I've been on this forum for almost a year now. Went idle for a bit when the Ranger wasn't running or being worked on. But we're back baby!! 1994 XL RWD 5-speed 2.3L Better known as Grimace Quick recap of how I got here: -bought non-running off FBM; claims it "only" needs a...

I’ve been having some issues with my work truck, listed in the title. I believe it has the 4R44E or 4R55E transmission. The transmission was rebuilt in August 2023, and has been mostly trouble free since then. The internal speed sensor did go out at one point a few months back, so we had that...

My 2003 XLT w/ the 4.0 starts good in the cold, but will start to slowly stall and is unresponsive to me tapping the gas. If it doesn't stall, it will just sputter around <500 RPM before eventually recovering. How can I fix this?

Hello ranger danger guys i have a 99 ford ranger 2.5 liter. Just did maintance (coil packs wires spark plugs) truck is runing good but when im at idle and i gas it in nuetral and comes back down starts misfiring. When i go to gas it runs excellent . Im looking for some knowlagble answers for...

Hello everyone. I have a 2004 Ranger 3.0 AT 4x2 with 200k miles. Last driver drove it looks like it started losing coolant in town and then he got on the freeway and drove until the engine quit. It’s been sitting in the driveway for over a year now because I assumed the engine was blown and I...

I have a 97 2.3 ranger that has started having some problems recently, It started with staring rough and sputtering a little when cold out, then it got to where it would stall when you shifted into gear unless it was warm or you gave it some gas at the same time as shifting. here recently it...