What did you do to your Ranger today? (Part Deux!)

[SCOTTY]

Got these NOS touch halos on the way. I think I can key MY glove compartment lock cylinder to these.
I'll deal w/the trunk & GC cylinders in the future.

 

[scotts90ranger]

Did an oil change on the '97, of course I dropped the oil filter pliers in the drain pan before the filter was able to be taken off by hand...

 

[Rick W]

Did an oil change on the '97, of course I dropped the oil filter pliers in the drain pan before the filter was able to be taken off by hand...

I’m pretty sure that’s supposed to happen. I do it on a regular basis.

 

[Rick W]

I’m pretty sure that’s supposed to happen. I do it on a regular basis.

Afterthought: the phenomenon is directly proportional to the temperature of the oil you’re draining. If you’re draining cold oil from a truck that’s been sitting, it will almost never fall. If you park the truck after highway speeds, and the oil is as hot as the center of hell, they’ll drop every time.

 

[Curious Hound]

I usually drop the filter. And I can tell you without a doubt. The filter on a 7.3l powerstroke makes a bigger sploosh than your funny little pliers.

 

[scotts90ranger]

I know that all too well, those FL1995 filters are huge... on my 7.3L conveniently there is just enough clearance for a 5 gallon steel bucket that I cut the top off of (from paint solvent at work) to use that as a drain pan, I learned the hard way that no other pan that I have is capable of the 14? quarts the dang thing holds...

Yesterday I meant to take the '97 Ranger out of "summer mode" by pulling the intake temp resistor I put in so I don't have spark happening after TDC when it's hot... so did that this morning, now it knows the actual temperature instead of thinking it's always 80F...