My Bronco 2

[4.0B2]

Just go for it. You can have a lot more research an info than I did doing the swap.. I don't think the second gen dash should ever see a first gen. I like the first gen to much.

So JUST DO IT!

 

[4.0B2]

Better?!!!?

Much better! Lol. Its lunch break. Then do other side!

 

[4.0B2]

 

[Boggin]

much better!

 

[4.0B2]

Well today was the first time cutting on the body for me.. And I didn't even sweat it.. Uh oh! Lol

 

[Andres629]

That's the first step.

 

[4.0B2]

That's the first step.

well i don't have a lot of plans to cut on the body of this rig.. its to solid. to much of a DD.. but that part had to be cut. after the axle swaps i'm gonna try to lower my COG slightly so i might do a slight fender trim. 33's or 35's idk yet. i'm gonna see what my height is after the swaps and see which way is the best to go.

 

[railman]

I agree that it looks much better

l8r, John

 

[4.0B2]

next comes rebolting or riveting on the inner fender to the outer to help stiffen it up. gonna go back wednesday and work on it more... but the worst part of that is done now.

 

[Andres629]

So... how much lift is on this thing?

 

[4.0B2]

So... how much lift is on this thing?

4 inch RC lift, with add a leafs in the rear also.
the kit gave me about 4.5 inches i think.. i really don't know.

no body lift at all

when the axle swaps are done, who knows??!! lol

 

[86 slo-vo]

Well today was the first time cutting on the body for me.. And I didn't even sweat it.. Uh oh! Lol

youve got more balls then me, im scared to cut mine....




































ehhhhh **** it, just sheet metal

 

[Andres629]

4 inch RC lift, with add a leafs in the rear also.
the kit gave me about 4.5 inches i think.. i really don't know.

no body lift at all

when the axle swaps are done, who knows??!! lol

You'll be looking at 33's then. My BII has a 4" on it and 35's... and you know how much I cut my fenders out! Maybe you don't... but it was the whole factory flare.

 

[4.0B2]

You'll be looking at 33's then. My BII has a 4" on it and 35's... and you know how much I cut my fenders out! Maybe you don't... but it was the whole factory flare.

lol yeah, i've stumbled across some pics lol.. i'm only focused on making 33's fit.. for now.

 

[4.0B2]

Used a 1/4" rivet to hold the inner fender to the outer. Then added a piece of vacuum line I split open over it. Looks better in my opionion. Gonna get some of the actual stuff for it or just glue this on lol