- Joined
- Aug 23, 2007
- Messages
- 4,688
- Points
- 3,101
- Vehicle Year
- 1984, 1999
- Transmission
- Manual
Nice, I need to pick up a project truck or get working on my old 84.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
- Joined
- Mar 28, 2010
- Messages
- 683
- Points
- 3,101
- Age
- 41
- City
- Elwood,Texas
- Vehicle Year
- 2003
- Transmission
- Automatic
Truck looks good Mike, I can't wait to see it with the new Goodyear MTs on it. Good work.
- Joined
- Feb 24, 2009
- Messages
- 2,367
- Points
- 3,101
- Age
- 36
- City
- Saskatchewan!
- Vehicle Year
- 1985/91
- Transmission
- Automatic
Sumbitchin' pileuhmonkey nuts, yeehaw! You'll clear those 32's no worries.
- Joined
- May 14, 2009
- Messages
- 5,397
- Points
- 3,101
- City
- Canada
- Vehicle Year
- 2005
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 2"
- Tire Size
- 31"
- My credo
- The fun begins where the pavement ends
Yeah I did the stacked washer spacer lift up front.
Thanks Topher, the PO didn't abuse this truck, just work it hard and not really maintain it. I think he was pretty happy that it ended up in my hands and I'd fix it up. I'll have to show him when I'm done.
Truck looks good Mike, I can't wait to see it with the new Goodyear MTs on it. Good work.
I think it will look good too clay, thanks for the compliment.
That's the hope, but I'l talk to whoever is mounting my tires at work and give him permission to trim just in case
- Joined
- Feb 2, 2010
- Messages
- 3,059
- Points
- 3,101
- City
- Medford, Oregon.
- Vehicle Year
- 1996
- Transmission
- Manual
I did only a coil spacer and fit 32's, I prolly wouldnt have had to trim except 10in wide wheels with 3in backspacing so I had to cut off like 2inches of metal.
- Joined
- May 14, 2009
- Messages
- 5,397
- Points
- 3,101
- City
- Canada
- Vehicle Year
- 2005
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 2"
- Tire Size
- 31"
- My credo
- The fun begins where the pavement ends
Today was a good day wrenching. No advancement on the high idle issue. I jerry rigged the air filter together with double sided tape to seal it, cleaned the MAF, checked the plenum, cleaned the throttle body and swapped out my IAC for another one I just cleaned and... nothing. Still idles way high, I drove it around the block and when I pulled into my driveway in Drive it idled normally but as soon as I put it in Park it idled right up. It also slams into reverse. But still, at least I drove it around the block!
No pics of the intake stuff, i was stressed out because the truck had a draw, turns out my hazard switch was on, it's wired backwards.
Here's some pics:
Reconnected both sway bars.
I used hitch coupler pins for the front, they are a little small so they rattle but w/e, sway bars aren't under huge amounts of stress.
Put on a tailgate cap, I've got a line on them through work.
Such a sweet logo. So sick, testing out the cameras abilities.
The same picture you all saw yesterday, just in the light.
Drove it around the block, handled really nicely.
Enough Rangers in this picture? I just cut out my neighbours green '02
No pics of the intake stuff, i was stressed out because the truck had a draw, turns out my hazard switch was on, it's wired backwards.
Here's some pics:
Reconnected both sway bars.
I used hitch coupler pins for the front, they are a little small so they rattle but w/e, sway bars aren't under huge amounts of stress.
Put on a tailgate cap, I've got a line on them through work.
Such a sweet logo. So sick, testing out the cameras abilities.
The same picture you all saw yesterday, just in the light.
Drove it around the block, handled really nicely.
Enough Rangers in this picture? I just cut out my neighbours green '02
Last edited:
Looking at that brush guard, it seems like if you swapped the side pieces from one side to the other it may line up better. Or maybe I'm just being stupid and blind 
speaking of blindness, I like the two Rangers in the background.
speaking of blindness, I like the two Rangers in the background.
- Joined
- Feb 24, 2009
- Messages
- 2,367
- Points
- 3,101
- Age
- 36
- City
- Saskatchewan!
- Vehicle Year
- 1985/91
- Transmission
- Automatic
Looking good, Mike! I've got the same high idle issue on my BII... can't be bothered to fix it though, she still runs and drives just fine, just idles at 1200 is all.
- Joined
- May 14, 2009
- Messages
- 5,397
- Points
- 3,101
- City
- Canada
- Vehicle Year
- 2005
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 2"
- Tire Size
- 31"
- My credo
- The fun begins where the pavement ends
Looking at that brush guard, it seems like if you swapped the side pieces from one side to the other it may line up better. Or maybe I'm just being stupid and blind
speaking of blindness, I like the two Rangers in the background.
Yeah, I need to get around to swapping them. I made that pic my desktops background
- Joined
- Jul 7, 2009
- Messages
- 1,809
- Points
- 3,101
- City
- Loganville GA
- Vehicle Year
- 1990
- Transmission
- Manual
Man that is a sweet looking 4X!!!!
- Joined
- May 14, 2009
- Messages
- 5,397
- Points
- 3,101
- City
- Canada
- Vehicle Year
- 2005
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 2"
- Tire Size
- 31"
- My credo
- The fun begins where the pavement ends
Thanks multi!
Drove down to the shop today to get the windshield replaced, however that didn't pan out so I've been bumped to later this week, NBD I have some other stuff to do and access to hoist will make it way easier. Tomorrow getting all the chassis stuff sorted and the alignment done. I'm looking at about a week and then I'll be DDing it. Probably going to install a winterpack on it though
- Joined
- May 14, 2009
- Messages
- 5,397
- Points
- 3,101
- City
- Canada
- Vehicle Year
- 2005
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 2"
- Tire Size
- 31"
- My credo
- The fun begins where the pavement ends
So I was going to post pics of my truck with its new tires on the alignment rack but apparently my cell phone's memory card won't get recognized by anything. Shitty.
And the high idle... turns out my cruise control cable was binding up. It's getting the alignment finished tomorrow morning and the windshield in the afternoon. Just needs front brake lines and it will be ready for safety. When it was getting the ball joints done I got 2 new u-joints and almost the whole front end re-sealed. Soon.
And the high idle... turns out my cruise control cable was binding up. It's getting the alignment finished tomorrow morning and the windshield in the afternoon. Just needs front brake lines and it will be ready for safety. When it was getting the ball joints done I got 2 new u-joints and almost the whole front end re-sealed. Soon.
Sponsored Ad
Sponsored Ad
Special Events
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
TRS Latest Video
TRS Merchandise
Follow TRS On Instagram
