File Sharing! Anyone have any handy Ranger Related STL and DXF files to share?

[PlumCrazy]

I wanted to start a thread for sharing useful files for 3D printing and/or CNCing stuff for Rangers

With how affordable 3D printers are and how easy it is to have things made by CNC like through Send-cut-send etc.... I why not share files here for Ranger related stuff

I'll start by attaching this M5OD support block STL I whipped up for sitting the trans on a trans jack without it constantly trying to slide off or roll over.

I'm somewhat new to the 2D/3D data world so if there are other file types that would be helpful lets discuss them here. I know @Jim Oaks has enabled STL and DXF so far.

EDIT:
Added a few more:
The gauge panel does require significant trimming to the vent area (Its not reversable is what I'm saying)
The key lock out delete is designed to be printed in TPU so it has the give needed to install
My original PLA tcase bushing is still going after 10K miles now

 

[Shran]

Here's a handful of tabs & brackets - these are all my drawings

 

[Shran]

RBV Related: TTB coil spacers. You can get these at Bronco Graveyard but since I have a plasma table I drew my own version and cut them as needed. I use 1/4" plate, you need 1-2 of the hex ones to start with and then as many round ones as you feel are necessary on top of those. Great for levelling your truck side to side.

 

[97RangerXLT]

this thread is pure excellence... keep this stuff coming.

AJ

 

[PlumCrazy]

this thread is pure excellence... keep this stuff coming.

AJ

I try to contribute to society every now and again.

 

[RobWigglezz]

I'll draw this up at work tomorrow. I kinda just winged it when I made it.

 

[Jim Oaks]

I don't know much about this. When Plum contacted me about it I told him I'd make it so that those file types could be uploaded. If anyone has a problem uploading, please let me know. The plan is to organize these on a page on the website as a resource where they'll be organized and easy to find.

 

[Shran]

It would be helpful if people sharing files could do a screenshot of the part or a picture of the final results. I am planning on going back and doing that for my tabs & brackets post, my CAD program is acting up so I'll go back & edit it once I have it fixed.

 

[Roert42]

I'll draw this up at work tomorrow. I kinda just winged it when I made it.

Those plastic bodies always tend to be broken. I made one from a chunk of 10ga stainless a few years ago.

 

[PlumCrazy]

It would be helpful if people sharing files could do a screenshot of the part or a picture of the final results. I am planning on going back and doing that for my tabs & brackets post, my CAD program is acting up so I'll go back & edit it once I have it fixed.

Same thing I was going to do.

 

[Shran]

Also related: if any of you have plasma/laser/water jet tables or access to one, Langmuir Systems has a free file sharing page on their site. I have found a few things in here that were really handy so that I didn't have to draw things from scratch. Mainly signs, letters, and stuff like that but there are also a large number of tabs and builder parts.

Explore | FireShare | Langmuir Systems

www.langmuirsystems.com

 

[SenorNoob]

Not mine. Just found through a Google search.

Ford Ranger Gen 1 interior door handle​

1983 - 1988 Ford Ranger Armrest / Door Pull​

The second one is a 2 piece design to fit smaller printers. The engineer at work might be printing me a set...

 

[Li'l Work Truck]

This is an awesome thread. I'm getting a K2 Plus Combo soon. I need a 3D scanner, too...

 

[SenorNoob]

I've heard some phones can do the 3d scan...