- Joined
- Jan 9, 2022
- Messages
- 27
- Points
- 101
- City
- Texas
- Vehicle Year
- 1996 and 2004
- Transmission
- Manual
- My credo
- I am obsessed with birds.
I made a comment in another thread that I made my own fog light mounts/brackets. A few people were interested to know how I did it. I used aluminum angle stock. The bumper has existing bolts near the fog light location. You can see where the existing bolt is in my picture. I drilled for that first, making sure that the angled aluminum extends far enough over that I could make a hole to line up the fog light. I bolted the metal in place, then marked the hole to drill for the light. Then, I hung the lights upside down. I got the angled aluminum from Lowes, and it took maybe 45min to do both sides. I hope this helps. 
