Code 332, EGR Failure.

[xl93]

I have a 1993 Ranger XL, 4.0 liter V6 with some interesting EGR issues. Check Engine light came on, code 332. I have replaced the solenoid, diaphragm, and sensor. Cleared codes, ran it, light still came on, code 332. Took everything off, cleaned the hoses, inside the pipe, ect. Cleared the codes, ran it again. Still, code 332. Not sure what to do now, any helpful information would be appreciated. Thanks.

 

[adsm08]

So you have a wiring problem.

 

[xl93]

It's been quite a while since this was posted.. but the issue was a block in the return exhaust line for the EGR. hadn't noticed it before. Smogged fine.


Sent from my iPhone using Tapatalk