Bronco II gas tank in my 91' Ranger XLT

[allpau2thou]

Got a rear mounted Bronco II gas tank and planning to install it in my 91 4.0 (now 5.0) Ranger. Figured I would put some pictures on here and maybe get some ideas from whoever has some.

 

[allpau2thou]

From bracket

Rear bracket (first time ever welding so excuse the poor quality)

Side view

Top view

 

[allpau2thou]

Using and electric external pump and going to run both my lines through the existing sending unit. Any recomendations what to do with the end of the pick-up line to keep a filter on it. The sending unit is the one with the plastic canister housing...

 

[Dangerrangers]

Using and electric external pump and going to run both my lines through the existing sending unit. Any recomendations what to do with the end of the pick-up line to keep a filter on it. The sending unit is the one with the plastic canister housing...

I ran one that way and the external pump pulled the gas thru the existing in tank pump with no problem ,no loss of fuel pressure or anything and I didn't have to Mickey mouse a in tank strainer . YMMV