Arkansas ranger owner.

[Heather’s94]

80s Nissan Hardbody shocks used to be the lowered Ranger go to… Or Squarebody C10 front shocks as rears for a Ranger with an axle flip…

I’ve done a rear shackle flip on my 94 rcsb 2wd. Going to use the Gabriel Load Assists off the front of my wife’s 85 C10 swb lowrider project. Also added a pair of 500#/ea overload half leaves. Even a 2.3 can get the rear axle doing the boogity boogity if your truck has 2+1 instead of 3+1 or 4+1 rear springs.

You might ask a mod to move your thread to the 2wd build section. This looks like it’s well worth following.

 

[IBBW]

Shake down passed. 318k and counting.

 

[IBBW]

80s Nissan Hardbody shocks used to be the lowered Ranger go to… Or Squarebody C10 front shocks as rears for a Ranger with an axle flip…

I’ve done a rear shackle flip on my 94 rcsb 2wd. Going to use the Gabriel Load Assists off the front of my wife’s 85 C10 swb lowrider project. Also added a pair of 500#/ea overload half leaves. Even a 2.3 can get the rear axle doing the boogity boogity if your truck has 2+1 instead of 3+1 or 4+1 rear springs.

You might ask a mod to move your thread to the 2wd build section. This looks like it’s well worth following

I need to. This is just getting started.

 

[IBBW]

Did the 02's. Ran it another 30 minutes. Looks ready. Got rust converter coming. New fill hose.

You can rob the connector out of your stock radio. Nice spades to solder your plug to. No cutting or ruining anything. I covered the connections in rubber adhesive. Keep.the sparks in.