anyone know bump stop distance to axle???

[pillen140]

ok, anyone know what the Stock distance from front axle bump stop to axle... on a '93-97 4x4 ranger??? thanks in advance.

 

[pillen140]

bueller...... bueller......

 

[Stretch94Ranger]

im wonderin the same thing mine looks really close but it may be normal

 

[canyoncritter]

this might help you.

look at the spring height and do a little mocking up on your truck and you should be able to figure it out.

https://www.fleet.ford.com/truckBBAS/non-html/1997/a16.pdf

 

[tanbuddy]

On my truck it was about 5/8 inch if i remember

 

[CopyKat]

Stock should be about 2"

 

[pillen140]

hmm, well, i got 2inch coil spacer, and it seems almost like its 2inches from the axle. i will measure for sure. anyway, not much room for travel!

 

[Will]

Here's how to measure ride height according to the service manual.

 

[pillen140]

thanks for the info. i measured mine, to the bumpstop 2inches, like shown above was 3 3/4