wsup dudes, I have a 3 inch block and u-bolts for the read but for the front when i attached a 3 inch spacer and after it was installed i couldnt get the upper control arm to attach to the spindle. would it be easier to add some sort of drop pitman arm or should i just buy a 3 inch spindle lift and leave the coil spring spacer alone.
If you know of any spindle lifts for a 99 ranger please let me know its hard finding parts for such an old truck. Rough Country completely skipped over this trucks 2wd
If you know of any spindle lifts for a 99 ranger please let me know its hard finding parts for such an old truck. Rough Country completely skipped over this trucks 2wd
