- Joined
- May 14, 2018
- Messages
- 1,787
- Reaction score
- 1,086
- Points
- 113
- Location
- Western Mass.
- Vehicle Year
- 1994
- Make / Model
- Ford/Ranger XLT
- Engine Type
- 3.0 V6
- Transmission
- Manual
- 2WD / 4WD
- 2WD
- Tire Size
- 225/70/R15
- My credo
- If it's not broken Don't Fix It!
I have a 94 Ranger XLT 2wd and have been wanting to add the factory 4wd fog/driving lights to the front along with the valance panel. I know the wiring is already there and I know I need to get the switch, the dash face with the hole for the switch and the relay for the fuse block under the hood but is there anything else that is needed to make the factory system complete?
I do have one more question about the factory lights. The halogen bulbs they use, I've used them in the past, seem like they do not last long for me. Is there other bulbs that are usable in them that last a longer time or are they only usable with the blow every 3 months or so stock type?
I do have one more question about the factory lights. The halogen bulbs they use, I've used them in the past, seem like they do not last long for me. Is there other bulbs that are usable in them that last a longer time or are they only usable with the blow every 3 months or so stock type?