Tyler Shensky
New Member
- Joined
- Dec 5, 2010
- Messages
- 13
- Reaction score
- 0
- Points
- 0
- Location
- Flat Rock, Mi
- Vehicle Year
- 1993, 1997
- Make / Model
- Ford
- Engine Size
- 2.3
- Transmission
- Manual
I have a huge problem, i just put a new engine in my 93' ranger and it will not start. I have checked all the wiring and everything tons of times. I am getting spark but no fuel. The injector rail has fuel in it and enough pressure but the injectors are not firing. I checked the voltage on the wiring that attaches to it and both Red and Tan wires are getting a charge. I have spent the last week or so trying to find what could be causing this. I have checked the Ignition Control Module, Crankshaft Postion Sensor, and most other modules or sensors. I would be grateful if somebody would help me out here, because I am getting no where.