ecgreen
Well-Known Member
- Joined
- Sep 21, 2018
- Messages
- 720
- Reaction score
- 287
- Points
- 63
- Location
- Dunbarton NH
- Vehicle Year
- 1989
- Make / Model
- Ford Bronco II
- Engine Type
- 2.9 V6
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- 3"
- Tire Size
- 33
I am cleaning up the wiring on my 89 BII. I found what I think is an aftermarket car alarm. Let me know what you think. There are a few questions in here too..check it out.
There is a horn of some sort on the driver's side in the engine bay (all of this is driver's side). The horn, as well as a harness that runs through the firewall is very poorly splice into the exisiting harness along with 3 relays. I am not really sure what the last one is, but it looks like a relay. Are ANY of these from the factory?
These wires go through the fire wall and eventually connect to a key locking thing and a mystery black box. There is also some sketchy splicing and a wonderful jerry-rigged fuse deal.
So what is it??? A car alarm??
There is a horn of some sort on the driver's side in the engine bay (all of this is driver's side). The horn, as well as a harness that runs through the firewall is very poorly splice into the exisiting harness along with 3 relays. I am not really sure what the last one is, but it looks like a relay. Are ANY of these from the factory?
These wires go through the fire wall and eventually connect to a key locking thing and a mystery black box. There is also some sketchy splicing and a wonderful jerry-rigged fuse deal.
So what is it??? A car alarm??