srteach
New Member
- Joined
- Aug 11, 2007
- Messages
- 977
- Reaction score
- 9
- Points
- 0
- Vehicle Year
- 1999, 2001
- Make / Model
- Ranger, F350
- Engine Size
- 4.0L, 7.3 Diesel
- Transmission
- Manual
Could someone tell me what would cause a problem that would bring up a "misfire detector disabled" when I hook up my OBDII diagnostic computer?
What and where is the misfire detector? Is it part of the coil pack? Is it a sensor? or a plug problem? Any help (other than it detects misfires) is appreciated.
This is on a 1999 XLT Ranger 4.0L OHV engine, M5D Trans. Engine placed in the truck on 6-21-08 from the junk yard. Intake, exhaust and coil pack from original engine.
I just finished a 120 mile trip at interstate speeds, the CEL came on after 15 minutes of in town driving.
What and where is the misfire detector? Is it part of the coil pack? Is it a sensor? or a plug problem? Any help (other than it detects misfires) is appreciated.
This is on a 1999 XLT Ranger 4.0L OHV engine, M5D Trans. Engine placed in the truck on 6-21-08 from the junk yard. Intake, exhaust and coil pack from original engine.
I just finished a 120 mile trip at interstate speeds, the CEL came on after 15 minutes of in town driving.