DangeRanger69
New Member
- Joined
- Jun 30, 2023
- Messages
- 2
- Reaction score
- 1
- Points
- 3
- Location
- California
- Vehicle Year
- 1988
- Make / Model
- Ford Ranger
- Transmission
- Manual
Hello! I have an 88' Ranger, 2.3L L4. I am swapping the rear axle for one out of an 85' Ranger to take advantage of the 4.10 LSD dif. vs. my 3.73 current open dif. (Both 7.5") While I have the axle out I am changing all the brakes, I have everything set to upgrade from 9" brakes to 10" brakes and as far as I understand it will all go onto the same backing plate. The only issue I am running into is I cannot seem to find the E-brake levers or the driver (left) side Parking brake strut! Everywhere only has the right strut. I also noticed there do not seem to be any pins in the cylinders new or old that remove? Just want to check about this since I've never seen that on drum brakes. Any advice appreciated! Thanks.