- Joined
- Sep 22, 2007
- Messages
- 177
- Reaction score
- 0
- Points
- 0
- Age
- 40
- Location
- Terrace B.C.
- Vehicle Year
- 1987
- Make / Model
- Ford
- Engine Size
- 2.9l
- Transmission
- Manual
hello.... my truck died the other day(86 ranger on b2 frame with 2.9l) so i did a little diggen and reading and was noticing that the relays were not clicking on and the pump was not running for its 3sec before start...
I changed the EEC relay and herd it click when trying to start.. then i change the FP relay and it clicked when trying to start but not pump noise.... so i checked the Enersa switch and there was power going in and not out... i jumpered it and tried to start it and herd the pump running and turned it over and it runs...
I guess what im asking is... has anyone had both relays and the enersa switch crap out on them at the same time??
Later
Kris
I changed the EEC relay and herd it click when trying to start.. then i change the FP relay and it clicked when trying to start but not pump noise.... so i checked the Enersa switch and there was power going in and not out... i jumpered it and tried to start it and herd the pump running and turned it over and it runs...
I guess what im asking is... has anyone had both relays and the enersa switch crap out on them at the same time??
Later
Kris