TxRanger2618
New Member
- Joined
- Sep 26, 2021
- Messages
- 6
- Reaction score
- 5
- Points
- 3
- Location
- Idaho
- Vehicle Year
- 2001
- Make / Model
- Ford Ranger
- Transmission
- Automatic
Hello everyone,
after searching long and hard I can't seem to find anyone building these anymore. I have therefore decided to produce some of my own. it will take me a few weeks to get the design perfected and produced. that being said I would like to get some input on any changes or ideas that should be made when building these.
To start off with. I will be building these out of 3/8 steel plate. I will be using a CNC plasma table to produce all the parts and I will either be TIG welding or using flux-core to weld everything together. the design runs off the common bushing width of a shock at about 1.5" wide for the eyelets. I will be building both upper and lower pieces. I have preliminary CAD designs up and running and should have something viable in the next week or so.
after searching long and hard I can't seem to find anyone building these anymore. I have therefore decided to produce some of my own. it will take me a few weeks to get the design perfected and produced. that being said I would like to get some input on any changes or ideas that should be made when building these.
To start off with. I will be building these out of 3/8 steel plate. I will be using a CNC plasma table to produce all the parts and I will either be TIG welding or using flux-core to weld everything together. the design runs off the common bushing width of a shock at about 1.5" wide for the eyelets. I will be building both upper and lower pieces. I have preliminary CAD designs up and running and should have something viable in the next week or so.