Ginja808
New Member
- Joined
- Nov 22, 2021
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Location
- Hawaii
- Vehicle Year
- 2003
- Make / Model
- Ford ranger xlt
- Transmission
- Manual
Chackler , 1 Minute Ago
Member
Hi all, another common 4x4 shifting problem. 2003 ranger XLT 4.0 manual. New motorcraft 4x4 control module, new transfer case shift motor, fuses good. I can shift into 4hi, but the shift motor does not continue turning to 4lo. I have verified this by removing shift motor but leaving it plugged in and having someone turn the selector switch with brake on while I watched shift motor turn. It will shift to 4hi,sometimes on its own go back to 2wd or just stop at 4hi. I have sifted through the forums and can't find this particular situation. I know on the earlier models there is a speed sensor to make sure you're not going over a certain speed before it shifts into 4lo, does my model have anything like that? Thank you
Member
Hi all, another common 4x4 shifting problem. 2003 ranger XLT 4.0 manual. New motorcraft 4x4 control module, new transfer case shift motor, fuses good. I can shift into 4hi, but the shift motor does not continue turning to 4lo. I have verified this by removing shift motor but leaving it plugged in and having someone turn the selector switch with brake on while I watched shift motor turn. It will shift to 4hi,sometimes on its own go back to 2wd or just stop at 4hi. I have sifted through the forums and can't find this particular situation. I know on the earlier models there is a speed sensor to make sure you're not going over a certain speed before it shifts into 4lo, does my model have anything like that? Thank you