B2300
New Member
- Joined
- Feb 1, 2018
- Messages
- 4
- Reaction score
- 1
- Points
- 3
- Location
- California
- Vehicle Year
- 1994
- Make / Model
- Mazda
- Transmission
- Automatic
I have a 1994 2.3L B2300 stick (same as Ranger) with 330K miles. The problem is that it is hard to start when the engine is cold (take 3 to 4 cranking to start). Once I get it started and run for a while (meaning the engine is all warmed up), then I don't have any problem starting throughout the day. No rough idle, no CEL light, runs smoothly with A/C on, etc ...
I changed out sparks, sparks wires, coolant temp sensor, coil packs, fuel filter, fuel pump. I also cleaned IAC as well.
I changed out sparks, sparks wires, coolant temp sensor, coil packs, fuel filter, fuel pump. I also cleaned IAC as well.