I went out to the junk yard and attempted to remove ththe pedal assembly went screw that borrowed a cordless sawzall and cut the tube that is fitted to the clutch pedal. Got tall the bits and bushings.
Came home grabbed a piece of 5/8 cold rolled put a 1/2" NC thread on a inch of it.
Made a little bushing with 1/2 NC thread welded it to the clutch arm now I can install with out hating life. I also added a grub screw to the thread and some blue loctite.
I installed all the bushing and cut a groove for the c clip into the shaft.
I removed the fuel tank washed it out dried it out with my leaf blower and re installed it.
I highly recommend running a die over your bolts before re installing a tank made it a dream.
Just a little up date.
Ps. May buy and ram a big front mount intercooler in this thing.
If I can get it past my wife