Alistar1776
New Member
- Joined
- Oct 26, 2022
- Messages
- 17
- Reaction score
- 5
- Points
- 3
- Location
- Missouri
- Vehicle Year
- 92
- Make / Model
- Ford Ranger
- Transmission
- Manual
So, I'm stumped. Passenger side turn signal works great, both headlights on and off. With headlights/running lights off on the driver side, i get only the front signal. With headlights/running lights on, on the driver side, I get no turn signal at all, and the indicator on the dash remains constant on.
Bulbs are new all the way around, multifunction switch replaced, fuses are good, relay is new. When i have the lights off so the driver front flashes, its dim, and inconsistent. All help appreciated.
Edit: I should also mention hazards work except for driver rear.
Bulbs are new all the way around, multifunction switch replaced, fuses are good, relay is new. When i have the lights off so the driver front flashes, its dim, and inconsistent. All help appreciated.
Edit: I should also mention hazards work except for driver rear.