- Joined
- Jun 6, 2009
- Messages
- 1,919
- Reaction score
- 39
- Points
- 48
- Location
- Saskatoon, SK, Canada
- Vehicle Year
- 1993 / 2001
- Make / Model
- Ford
- Engine Size
- HO 5.0 / 7.3 PSD
- Transmission
- Manual
Back at it boys.
Decided to make A-Pillar tie-ins to the cage.
Made a pattern, and cut out pieces from 0.125 plate.
Drilled holes, and dimple-died
Repeated for the other side, and tacked in place, I will need to paint behind these areas before final welding.
I have a few more small gussets I want to make, and then will get back to finishing the rear cage, mounting fuel cell, and radiator.
Cheers.
Decided to make A-Pillar tie-ins to the cage.
Made a pattern, and cut out pieces from 0.125 plate.
Drilled holes, and dimple-died
Repeated for the other side, and tacked in place, I will need to paint behind these areas before final welding.
I have a few more small gussets I want to make, and then will get back to finishing the rear cage, mounting fuel cell, and radiator.
Cheers.