Mechanical Rookie
New Member
- Joined
- Sep 20, 2018
- Messages
- 11
- Reaction score
- 0
- Points
- 0
- Location
- Sooke, BC
- Vehicle Year
- 1993
- Make / Model
- Ford
- Transmission
- Manual
Bowing to the experts here, hoping for assistance identifying some issues.
Vehicle: 93 ranger xlt, 2.3L manual transmission
While changing spark plugs on the exhaust side I noticed a small tube hanging loose near plug 4, I traced it back to a small black box in the front of the engine bay (drivers side near the battery), tried to find a spot to plug the tube back into but no luck. If I knew what the box was, maybe I can figure out where to connect the tube. Image attached
Second, while under the truck. Noticed what looks like a sensor on the casing But the wire has separated and broke off, not sure what this is
Vehicle: 93 ranger xlt, 2.3L manual transmission
While changing spark plugs on the exhaust side I noticed a small tube hanging loose near plug 4, I traced it back to a small black box in the front of the engine bay (drivers side near the battery), tried to find a spot to plug the tube back into but no luck. If I knew what the box was, maybe I can figure out where to connect the tube. Image attached
Second, while under the truck. Noticed what looks like a sensor on the casing But the wire has separated and broke off, not sure what this is