- Joined
- Apr 19, 2012
- Messages
- 139
- Reaction score
- 0
- Points
- 16
- Location
- Provo, UT
- Vehicle Year
- 1998
- Make / Model
- Ford
- Engine Size
- 5.0
- Transmission
- Manual
Been awhile since I posted. I recently picked up a ford 203 and a 205 for a doubler build. Just finished rebuilding the 205 tonight. Right now I'm saving up for the adapter and output shaft.
Also I built a new transmission crossmember.
And if you look close you can see I moved my radius arms in some on the axle because my tires were rubbing at full lock. Now there is no more rubbing and I have full steering range back.
I got 2 new KM2's
And a new KM1 as a spare for 100$
Side not I just finished a full rebuild on my FZ1 because the previous owner was running straight water which froze this winter and cracked the head.
Did a some light wheeling out at 5 mile pass.
Also I built a new transmission crossmember.
And if you look close you can see I moved my radius arms in some on the axle because my tires were rubbing at full lock. Now there is no more rubbing and I have full steering range back.
I got 2 new KM2's
And a new KM1 as a spare for 100$
Side not I just finished a full rebuild on my FZ1 because the previous owner was running straight water which froze this winter and cracked the head.
Did a some light wheeling out at 5 mile pass.