Dofter
Member
- Joined
- Nov 5, 2011
- Messages
- 48
- Reaction score
- 0
- Points
- 6
- Location
- Scottsdale, AZ
- Vehicle Year
- 1991
- Make / Model
- Ford
- Engine Size
- 3.0L V6
- Transmission
- Manual
Hey guys! I did some LED lighting in my Ranger and I thought I would share what I have done.
First off I ripped up the carpet to wire some of the wires under.
Second I found this bunch of wires under the headlight switch and spliced into the lhtblu/red wire (dash lights) and made kind of a "hub" for my wires.
I also found this ground next to the parking brake behind the kicker panel
Then I taped the power/ground wire all along the floor for the rear lights and the Sub lights.
I then wired up the foot well lights.
Here are the finished product pictures!
Please let me know if you have and questions or comments.
First off I ripped up the carpet to wire some of the wires under.
Second I found this bunch of wires under the headlight switch and spliced into the lhtblu/red wire (dash lights) and made kind of a "hub" for my wires.
I also found this ground next to the parking brake behind the kicker panel
Then I taped the power/ground wire all along the floor for the rear lights and the Sub lights.
I then wired up the foot well lights.
Here are the finished product pictures!
Please let me know if you have and questions or comments.