Marlinmahi
Member
- Joined
- Jun 25, 2021
- Messages
- 33
- Reaction score
- 1
- Points
- 8
- Location
- Fort Pierce, Florida
- Vehicle Year
- 1994
- Make / Model
- Ford ranger
- Transmission
- Automatic
I'm installing a heater valve. Found mine missing when I looked to see why hot air was coming out of the vents when the ac was turned off.
Anyway went to a junkyard and got a valve and while installing the last hose it broke.
So I just connected the lines together for now and ordered a new valve from rock auto for 2dollars less than the junkyards valve. But I noticed the vacuum line on the valve at the junkyard was really small and of course mine is missing all together. So I guess I'll be going under the dash. What size is the vacuum line? I have the rubber nipple that goes to the heater valve vacuum line, but will I need something like it for the other side?
Anyway went to a junkyard and got a valve and while installing the last hose it broke.
So I just connected the lines together for now and ordered a new valve from rock auto for 2dollars less than the junkyards valve. But I noticed the vacuum line on the valve at the junkyard was really small and of course mine is missing all together. So I guess I'll be going under the dash. What size is the vacuum line? I have the rubber nipple that goes to the heater valve vacuum line, but will I need something like it for the other side?