- Joined
- Oct 30, 2015
- Messages
- 277
- Reaction score
- 14
- Points
- 18
- Location
- St. Louis, MO
- Vehicle Year
- 1983
- Make / Model
- Ford
- Engine Size
- 2.3L
- Transmission
- Manual
- My credo
- Well, that didn't work. Let's try something else!
I'm looking for a known good 2.3L, preferably one with a distributor hole so it can be carbed. I *think* that's up to 94, but please check your motor if you're going to offer, please.
I
'll take later motors if you have the computer and all necessary wiring harnesses for the swap. It'd probably be better if it was a parts truck at that point so I can make sure I have everything I need. My budget ranges from a couple hundred up to a grand depending on what it is and how confident I am in it's condition.
I have a first gen with a bad 2.3 but is otherwise nice and would like to get it on the road. I don't mind a drive for the right deal. I live in Dittmer, Missouri and drive into the Glen Carbon area of Illinois often. I also have a brother near Champaign, Illinois that could pick something up, if it's in that area.
Let me know if you have anything. Thanks!
I
'll take later motors if you have the computer and all necessary wiring harnesses for the swap. It'd probably be better if it was a parts truck at that point so I can make sure I have everything I need. My budget ranges from a couple hundred up to a grand depending on what it is and how confident I am in it's condition.
I have a first gen with a bad 2.3 but is otherwise nice and would like to get it on the road. I don't mind a drive for the right deal. I live in Dittmer, Missouri and drive into the Glen Carbon area of Illinois often. I also have a brother near Champaign, Illinois that could pick something up, if it's in that area.
Let me know if you have anything. Thanks!