Koshunae
New Member
- Joined
- Oct 4, 2016
- Messages
- 9
- Reaction score
- 3
- Points
- 3
- Vehicle Year
- 2000
- Make / Model
- Ford
- Transmission
- Manual
I was looking for a Sport Trac cluster in a parts yard and while I didn't find one in a Trac, I found a 2001 Explorer (even had a 5 speed, nice!) with the same white face gauges so I picked it up. I was just wondering if this would be plug and play into a 2000 Ford Ranger 2.5L. I've searched over and over for a straight answer, but it hasn't found me yet.
So will this plug straight in and work (assuming nothing is wrong with the cluster itself) or do I need to switch pins in the cluster or harness to get all the gauges and tach working correctly? I'm assuming it will since it is basically the same cluster from the Sport Trac.
Thank you!
(Pic of the cluster http://i.imgur.com/IUZ2gxz.jpg)
So will this plug straight in and work (assuming nothing is wrong with the cluster itself) or do I need to switch pins in the cluster or harness to get all the gauges and tach working correctly? I'm assuming it will since it is basically the same cluster from the Sport Trac.
Thank you!
(Pic of the cluster http://i.imgur.com/IUZ2gxz.jpg)