dogboy
Active Member
- Joined
- Aug 6, 2007
- Messages
- 1,590
- Reaction score
- 14
- Points
- 38
- Age
- 32
- Location
- Enumclaw/ Carbonado, WA
- Vehicle Year
- '93
- Make / Model
- Ford
- Engine Size
- 4.0L
- Transmission
- Manual
I figure I'll start a thread for this truck, instead of having three build threads in one, in my crew can thread.
It's a 94 4.0l 5spd 4wd with a 4" lift that I picked up for $500.
It started out as an ugly truck, that I was just going to throw a clutch at, clean it up, and sell it.
After cleaning it up, I decided it needed the nose painted due to so many rock chips. I also started to like it, and decided to keep this Ranger, and sell my daily driver 3.0l swapped Contour SVT
Instead of repairing the sheet metal that was on the truck, which had been painted a few times, I decided to just get new 2005+ sheet metal (it's an 05 grille), and 2006+ tail lights.
It's a 94 4.0l 5spd 4wd with a 4" lift that I picked up for $500.
It started out as an ugly truck, that I was just going to throw a clutch at, clean it up, and sell it.
After cleaning it up, I decided it needed the nose painted due to so many rock chips. I also started to like it, and decided to keep this Ranger, and sell my daily driver 3.0l swapped Contour SVT
Instead of repairing the sheet metal that was on the truck, which had been painted a few times, I decided to just get new 2005+ sheet metal (it's an 05 grille), and 2006+ tail lights.
Last edited: